Surge Resistors In ESD Management Applications
In this post, we consider the use of Surge resistors to maintain operator safety in applications with the potential for high ESD.
The term Pulse generally refers to an overload condition withhigh power and long duration whereas surge generally means an overload of high voltage and with short duration (as in ESD).
The paper manufacturing industry noticed a potential problem with fast moving webs of material back in the mid 1800’s. Some printing, plastics, textiles and pharmaceutical (among others) industries manufacturing processes can generate high level static charges.
In some applications such as paint spraying or food product labeling static fields are a necessary part of the production process. In all cases high static fields can be a serious risk to personnel that must be managed appropriately.
Shielding, grounding, appropriate safety wear and personnel training can address many of the risks but specialist surge resistors may also be employed as a safety measure. The design, manufacture and installation of these devices are obviously of critical importance.
Surge Resistor Design And Manufacturing Considerations
ESD pulses can have various durations (typically 10 μs to 100 ms) and a wide range of amplitudes. Before attempting to choose a surge resistor for ESD management applications it is important to understand the ESD pulse. Using this information the peak power specification of the resistor may be calculated.
Based on cost vs performance thick film surge resistors tend to dominate the ESD suppression marketplace. Thick film technology is space efficient and relatively low cost and other technologies tend to be only used in a very limited number of specialist applications.
Wirewound resistors are not generally suitable for ESD applications. In surge-withstanding thick film resistors, the usable width of the resistive element is maximised. Trimming the track is usually avoided to avoid potential hot spots as resistor value and tolerance are not generally important in pulse management situations.
Resistor values tend to range from 100 MOhm to 500 MOhm. Tolerances tend to be 5% at best with 10% to 20% more common. For extreme applications, a specialist pulse resistor manufacturer may decide to modify the resistor paste materials or manufacturing process (or both) to achieve the required specification.
The choice of thick film paste can directly influence the ESD performance of the resistor device. The amount of potential damage to the conductive mechanism of the resistive material is directly related to the composition of that material. There are many resistive materials available each with their own design tradeoffs. The manufacturing method and choice of materials are also crucial. The firing method is particularly important.
There are many standard surge resistors for ESD applications available as standard devices but for specialist applications where personnel safety is of critical importance it is often best to consult a specialist thick film surge resistor manufacturer.